Michael Uche_eke

Biography

Experience QA/QC & NDT Inspector (ASNT level2), (CSWIP) 2011 - Present *COATING INSPECTION, Carrying out goods inward inspection Qualification of welders for various positions Witness and check strength test (hydrostatic test) of pipes and pressure vessels to verify integrity of welds. Carry out final visual inspection of welds. Perform Required Inspection as per ITP . Inspection and verification of flange alignment during pipe spools installation. Monitor Post Weld Heat Treatment operations as per approved procedures. .RT film interpretation Inspection of blasted surfaces to confirm surface profile is acceptable. Inspection of electrode consumables to conform with batch certificates and manufacturer’s instructions. Control of low hydrogen electrodes not meeting with manufacturer’s standards through baking and keeping consistent logs on use of such electrodes. Monitor the HSE/ quality / progress of the construction work on a daily basis (hands on) Working knowledge and understanding of HSE responsibilities; Working Knowledge of typical pipeline welding processes with particular emphasis on SMAW and TIG. Visual Inspection of pre-welding and post-welding activities in accordance with approved Welding Procedure Specifications. Ability to document work progress and maintain accurate and meticulous records. Material Inspection and conformity as per code/spec/Isometric drawing/P & ID requirement. Material inspection prior to commencement of fabrication and review of MTC against project requirements. Structures/Platform Supports Aerial Inspection and conformity as per code /specification/Approved drawing requirement. Dimensional and welding control during structural fabrication. Page 2 Mock up Test of, Main columns, Girder, Beams, staircase etc Review/preparation of WPS and PQR Mat-Witness MPI (magnetic particle inspection) and DPI (dye penetrant inspection) and evaluation of test results. Inspection of gratings and staircase installation TECHNOLOGIST 1 March 2011 - September 2011 (7 months) HYDRO-TESTING , COATING INSPECTION, FIRE ALARM EQUIPMENT INSTALLATION AND MAINTENANCE, N.D.T- X-RAY(RADIOGRAPHY) AND ULTRA-SONIC TESTING NDT INSPECTOR & CATHODIC PROTECTION January 2008 - February 2011 (3 years 2 months) X-RAY RADIOGRAPHY ACTIVITY FILM PRINTING, DEVELOPING & INTERPRETATION MPI and DP ACTIVITY CATHODIC PROTECTION ON 16" 365KM PIPE PROPER DOCUMENTATION OF NDT RECORDS • Coordinate interface with Client on issues of quality maters . • Update the project work progress status (Daily Report, Piping Welding Report {PWR} NDE Requests, Welding parameter records {WPR} ) • Interpretation of radiographs • Coordinate source inspection for Material to be used on the project • To ensure that any identified corrective action as regards quality that arises on the job are carried out fully and completely corrected inline with the job specification. • Preparation of quality control documentation used in the project. • Develop work procedure for pressure testing (Leak Test on project ) . • Developed reporting format from pre-commissioning & commissioning Education ILORIN, KWARA STATE (MATERIAL & METALLURGICAL ENGR.) 2004 - 2008 Delta state polytechnic O.N.D., Welding and Fabrication Engineering, 2004 - 2005 Page 3 Michael Uche_Eke Oil & Energy Professional QA//QC Inspector

Research Interest

A Welding Inspector and ASNT Level II in four methods (PT,MPT,RT & UT) with over 5years experience in welding and fabrication Inspection of pipelines, pressure vessels,Pipe manufacturing, Platforms, Pig launcher and Receivers, Manifold skids and structural works with a good knowledge of CODES and SPECIFICATIONS e.g API 1104, API 5L, ISO 3183, ASME section II ,V ,VIII ,IX , AWS D1.1,PD 5500,Good knowledge of HSE rules, regulations and compliance & good knowledge of ISO 9001:2008 Quality Management Systems